Her ser du Marley MkII fra M2Tech
    • Her ser du Marley MkII fra M2Tech
    • Her ser du Marley MkII fra M2Tech

    Marley MkII

    15.450,00 kr.
    Inkl. moms
    På lager

    The Marley MkII is a high-performance headphones amplifier with literally all you need
    for a first-class headphones listening.


    Its discrete components, low-noise design with FET input delivers crystal-clear power to every kind of headphones.

    The totally silent background, even with the most sensitive headphones, is granted by an ultra-low noise dual regulator.
    Up to 10Vrms max output voltage (20Vrms at the balanced output) allow every headphones model to give its best.

    The Marley MkII is very versatile: apart accepting both single-ended and balanced sources, it is provided with a 3-band tone control
    to allow user to tailor its frequency response to the headphones-ear one. The tone control can be disabled.
    As well, old stereo recordings (affected by the so-called “ping pong effect” caused by excessive channel separation) can be enjoyed by enabling the cross-feed circuit.
    Perfect match with every kind of headphones is also achieved by selecting the output impedance between Lo-Z, 10 OHms and 47 Ohms.
    A tape output and a preamp output (doubling the single-ended output on RCA connectors on the back panel) allow to use the Marley MkII as a true preamplifier.

    The Marley MkII can be operated by the front panel controls, by the IR remote control and by an app (available for both iOS and Android) via Bluetooth Low Energy.

    2x single-ended (RCA)
    balanced (XLR)
    trigger (3.5mm jack)
    headphones single-ended (jack 6.35mm)
    headphones balanced (4-pole XLR)
    tape out (RCA)
    preamp out (RCA)
    trigger (jack 3.5mm)
    5V (trigger)
    Input impedance:
    47 kOhms (single-ended)
    20 kOhms (balanced)
    Output impedance:
    Lo-Z/10 Ohms/47 Ohms (selectable)
    Signal-to-Noise Ratio:
    115dBA (single-ended)
    118dBA (balanced)
    0.0008% @ 9Vrms out on 8 Ohms
    Output Voltage Before Clipping:
    9Vrms (8 Ohms, Lo-Z)
    10Vrms (300 Ohms, Lo-Z)
    Tone Controls:
    +/-12dB in 1dB steps
    Supply voltage:
    15VDC or +15/-15/+5VDC
    Power Consumption:
    33W (9Vrms on 8 Ohms single-ended)
    0.5W (standby)
    200x200x50mm (wxdxh)
    net 2kg (including ancillaries)
    gross 2.5kg